LMH-NA New Product Announcement/RX60 Lift Trucks

Linde Material Handling-North America Corporation has introduced its new RX60 series of electric counterbalanced sit-down lift trucks. The eight models in the series have capacities ranging from 5,000 lbs. (RX60-25C and RX60-25L) to 10,000 lbs. (RX60-50). They are ideal for every manufacturing, storage and distribution, and logistics business where there is a need for emission-free high-performance trucks. The RX60-25C and RX60-30C feature cushion drive and steer tires, while the six remaining trucks in the series have SE drive and steer tires as standard equipment.

The innovative design team at Linde has ensured that each of the trucks in the series provides its owner with a variety of reasons for choosing Linde material-handling equipment:

Unmatched Performance:  The new rail design strengthens the mast and limits deflection, resulting in a superior residual capacity.  Fast travel speeds of 12 mph and lift speed of 100 fpm enable these trucks to operate in place of engine-powered units.  The trucks feature automatic power boosts, activated when the system sensors demand, to negotiate railroad crossings, curbs, steep ramps, or other obstacles.

Ergonomic Excellence:  Power and durability mean very little if driver fatigue becomes a problem.  The RX60 Series has been designed to minimize strain on the operator throughout the demanding work day.  The trucks each feature low noise levels (68dba), a floating operator compartment, tilted floorboard, fully adjustable suspension seat, and adjustable steering column.

Durability by Design:  All components and assemblies are tested to meet rigorous longevity standards:

• The heavy-duty cast ductile iron steering axle provides a strong structure.
• Major electrical component placement inside the counterweight offers protection.
• The counterweight dissipates naturally occurring heat during operation.
• Thermal protectors monitor components and limit power output in case of high temperature.

80 Volt Advantage:  The 80V Electrical System has maintenance-free enclosed motors and provides performance comparable to LP and diesel-powered forklifts.  The large battery compartments easily accommodate standard and vented batteries.  Additionally, a fast-charge assist is also available as an option.

Safety:  Excellent visibility of the load and through the mast – a key element for forklift safety – is accomplished with a unique rail design and with two free-lift cylinders instead of one.  This translates into a drastically improved field of vision.  Additionally, all performance parameters are adjustable to adapt to different operating conditions and customer requirements.  The “ramp start assist” function helps the operator with stopping and starting on inclines.

Versatile:  Both indoor and outdoor operations are easily handled by the RX60.  When equipped with full cab and electric heater, the RX60 functions in inclement weather like an engine truck.  On the other hand, fitted with cold storage equipment, it will also work in freezers with temperatures as low as -20 F.  The use of the dual front tires adds additional stability for wide loads or at high lift heights.

Energy-Efficient:  The highly effective energy return system can extend battery life by up to 15%, and energy use is limited and component life extended because all high-voltage components are mounted to the counterweight.  Exclusive Blue-Zone memory adaptive software maximizes truck efficiencies based on individual operator driving characteristics, resulting in additional energy savings of up to 20%.

Lowest Maintenance & Operating Cost:  The RX60 has extended 1,000 hour maintenance intervals; and design features like automatic deceleration, dual independent CAN-BUS control systems, maintenance-free brakes, and continuous on-board diagnostics make it even easier to maintain ideal working conditions.  The 3-phase AC system operates without brushes and is completely sealed, extending component life and reducing maintenance expenses.